Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
 SF-102
(SF102)

   
UL DUAL BED ROOM STATION


 

 

The SF-102 (SF102) Room Station includes two jacks allowing for the attachment of two call cords (SF-301 or SF-301A)

A call is registered at the nurse station, corridor light and corridor zone light (if installed) when either cord button is depressed or if either call cord is accidentally removed from the jack on the SF-102.

The station includes a lighted CALL-PLACED switch that lights when a call is placed. The CALL-PLACED switch also provides the system CANCEL function. All of the electronics are mounted on an attractive, flame retardant ABS plastic faceplate.

 

FEATURES

UL® 1069 Listed

Simple push button calling

Combined CALL-PLACED indicator and CANCEL button

Call automatically registers if either call cord is accidentally removed

Attractive, flame retardant ABS plastic faceplate

Corridor zone light capability

SPECIFICATIONS

Dimensions: Height 4.50” (114 mm) Width 2.75” (69 mm) Depth 1.75” (44 mm) Projects 0.4375” (11 mm)

Constructions: Attractive, flame retardant ABS plastic faceplate. Switches and electronic components are circuit board mounted.

Connections: Plug-in connectors

Housing: Single gang ring with square box.

REQUIRED COMPONENTS

Tek-CARE® NC-110 Nurse Call System

Click for Spec Sheet

Architects' & Engineers' Specifications:

 

 

The room station shall be TekTone® SF-102 or approved equal as supplied by LEE DAN® and shall include a lighted push button switch that serves as CALL-PLACED indicator and provides a CANCEL function. Two jacks for TekTone® SF-301, SF-301A (or approved equal) call cords are also provided. A call will be registered at the nurse station, corridor light, corridor zone light (if installed) and the station’s lighted CALL-PLACED switch if either call switch is pushed or if either call cord is accidentally removed from its jack.

All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on an attractive, flame retardant ABS faceplate. The station shall be housed in a standard single gang ring with square box. A plug-in connector shall be provided for corrections.

The SF-102 shall be UL® 1069 Listed

 

 

 

 

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated December 15, 2010

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8