Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
 PK152
(PK-152)

   
UL ANNUNCIATOR POWER &
CONTROL UNIT

REPLACES older models:
 PK151A (PK-151A), PK151 (PK-151), PK151N (PK-151N)


 

The PK152 (PK-152) Annunciator Control Unit provides power and control circuits to operate TekTone®’s Tek-CARE® NC-150, NC-200 and NC-110 nurse call systems, or the Tek-SAFE™ Area of Rescue assistance system. The PK152 unit contains the electronic circuitry necessary to detect the presence of normal and emergency calls, and to generate audible and visual control signals. It provides steady or intermittent voltages to operate visual signaling devices. The PK152 supports up to 1 amp of current load from field devices, and supports interconnection of a secondary power supply (PK-800A) to increase the output current load to 3 amps. Protective circuitry has been incorporated to protect routine and emergency call commons from shorts.

PK152 (PK-152) is a drop-in replacement for the PK151A, PK-151A, PK151N, PK-151N, and adds these features:

• Plug-in connectors for all wiring.

• Status indicators for both input and output power.

 

FEATURES

UL® 1069 Listed

 High-quality integrated circuitry and electronic components.

 Red LED for power in; Green LED for power out.

 Provides steady light and slow tone for normal call; flashing light and rapid tone for emergency call.

 Routine and emergency commons incorporate short protection circuitry. 

SPECIFICATIONS

Dimensions: Height: 5.50" (140 mm) Width: 3.125" (79 mm) Depth: 1.875" (48 mm)

 Construction: Electronic components mounted on a printed circuit board and housed in a rugged plastic case.

 Connections: Pigtails.

Temperature: 0°C–50°C.

Mounting: Surface-mounted (within 50' of master station).

Power: 24 VAC, 30VA.

Click for Spec Sheet

Architects' & Engineers' Specifications:

The power and control unit shall be TekTone® PK152 (PK-152) or approved equal as supplied by LEE DAN®. The PK-152 shall provide power and control circuits to operate audible and visual signals for emergency and normal calls of a complete Nurse Call or Area of Rescue assistance system. Normal calls must be indicated by a steady light and slowly repeating tone signal. The control unit shall automatically cancel the normal audible signal during intercom use. The unit shall contain all of the electronic circuitry needed for the features and functions mentioned above. The PK-152 shall support up to 1 amp of current load from field devices. It shall also support interconnection of a secondary power supply to increase the output current load to 3 amps (use TekTone®’s PK- 800A Power Supply). Regular and emergency common lines shall be protected against shorted connections. It shall be mounted on a printed circuit board and housed in a rugged plastic case.

The PK152 (PK-152) shall be ETL Listed to the UL® 1069 Standard.

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated July 22, 2013

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

©2001-2012 Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8