Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
 PK-612A
(PK612A)

   
24VDC
LAMP FLASHER


 

The PK612A (PK-612A) is a light-duty lamp flasher for DC use.

It is designed for emergency call annunciators or similar use where continuous operation is not necessary.

FEATURES

DC operation

Easy installation

Low power requirement 

SPECIFICATIONS

Dimensions: 5.0”H x 2.375”Wx2.25”D

Construction: Rugged extruded aluminum case housing quality electronic components on a printed circuit board.

Connections: Screw terminals

Mounting: Surface

Power Req’d: 24VDC

Duty: Light

Load Current: 1 amp 

REQUIRED COMPONENTS

CM-800 or CM-900 Series Annunciator

PK-601A Power Supply

PK-2019 Control Unit

SF-117/2B or SF-117/2C Emergency Call Switch

Or

SF-117/4B or SF-117/4C Emergency Call Switch

PS-30A Transformer 

Click for Spec Sheet

Architects' & Engineers' Specifications:

The lamp flasher shall be LEE DAN®/TekTone® PK-612A, or approved equal, and shall provide 24VDC to flash the lamps on specified TekTone® annunciator control panels and dome lamps.

The PK-612A circuitry shall be housed in a rugged extruded aluminum case. Screw terminals shall be provided for installation wiring.

 

 

 

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated July 12, 2012

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

©2001-2012 Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8