 LEE DAN® COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge, New York, 11788-3699 USA Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com Loading
|
|
|
 |
|
| PK-2019A (PK2019A) |
ANNUNCIATOR CONTROL UNIT REPLACES older model: PK-2019 (PK2019) |
 |
|
|
The TekTone® PK-2019A (PK2019A) Annunciator Control Unit is a general purpose annunciator control unit that is used with the CM-800 Emergency Call System and the DS-100 Door Sentry System. The PK-2019A provides tone signal, tone silencing, tone-silenced indication, auxiliary signal relay, and 24 VDC for accessory device operation. PK-2019A also provides three levels of tone volume control. |
|
| FEATURES |
|
Low-voltage operation Plug-in connector Three levels of tone volume control Power indicator |
| SPECIFICATIONS |
|
Dimensions: Height: 5.50" (140 mm) Width: 3.125" (79 mm) Depth: 2.0" (51 mm) Construction: Flame retardant (UL 94V-0) plastic Connections: Plug-in Power Required: 16 VAC 30 VA max. Output Current: 1 Amp. maximum Tone Speaker: 45 ohms (up to 3 in parallel) Tone-Off Lamp: .04 Amp. (up to 3 in parallel) |
| REQUIRED COMPONENTS |
|
PS-30A: UL Transformer, 16 VAC, 30 VA CM-800 Series Annunciator Panel Or DS-100 Series Speaker Panel |
Click
for Spec Sheet |
Architects' & Engineers' Specifications: The annunciator control unit shall be TekTone® PK-2019A (PK2019A) or approved equivalent as supplied by LEE DAN®. It shall be used with the CM-800 Emergency Call System and/ or the DS-100 Door Sentry System. The PK-2019A shall be capable of generating either a steady or intermittent alarm tone. The PK-2019A shall provide three levels of tone volume control. Plug-in type terminals shall be provided for connections. The control unit shall be constructed of flame-retardant (UL® 94V-0) plastic with an integrated circuit design.
|
| | Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring | |
This page was last updated June 25, 2013
|