Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
PK151A
(PK-151A)
*DISCONTINUED *
REPLACED BY  PK152 (PK-152)
   
UL ANNUNCIATOR CONTROL UNIT


 

The PK151A( PK-151A) provides power and control circuits to operate TekTone®’s Tek-CARE® NC110 and NC200 nurse call systems. The PK-151A unit contains the electronic circuitry necessary to detect the presence of normal and emergency calls, and to generate audible and visual control signals. It provides steady or intermittent voltages to operate visual signaling devices. The PK-151A supports up to 1 amp of current load from field devices and supports interconnection of a secondary power supply (PK800A) to increase the output current load to 3 amps. Protective circuitry has been incorporated to protect routine and emergency call commons from shorts.

 

FEATURES

UL® 1069 Listed

High-quality integrated circuitry and electronic components

Rugged extruded aluminum case

Provides steady light and slow tone for normal call; flashing light and rapid tone for emergency call

Routine and emergency commons incorporate short protection circuitry. 

SPECIFICATIONS

Dimensions: Height 9.50” (240mm) Width 2.375” (60mm) Depth 2.25” (57mm)

Construction: Electronic components mounted on a printed circuit board and housed in a rugged extruded aluminum case

Connections: Screw terminals

Temperature: 0 degrees C- 50 degrees C

Mounting: Surface-mounted (within 50’ of master station)

Power: 24 VAC, 30 VA

Click for Spec Sheet

Architects' & Engineers' Specifications:

The power and control unit shall be TekTone® PK151A (PK-151A) or approved equal as supplied by LEE DAN®. The PK151A (PK-151A) shall provide power and control circuits to operate audible and visual signals for emergency and normal calls of a complete nurse call system. Normal calls must be indicated by a steady light and slowly repeating tone signal. The control unit shall automatically cancel the normal audible signal during intercom use. The unit shall contain all of the electronic circuitry needed for the features and functions mentioned above. The PK151A (PK-151A) shall support up to 1 amp of current load from field devices. It shall also support interconnection of a secondary power supply to increase the output current load to 3 amps (use TekTone®’s PK800A Power Supply). Regular and emergency common lines shall be protected against shorted connections. It shall be mounted on a printed circuit board and housed in a rugged extruded aluminum case.

The PK151A (PK-151A) shall be UL® 1069 Listed

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated June 21, 2013

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8