Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
NC505ES, NC506ES, NC507ES
Tek-CARE 500
   
Tek-CARE Remote Receivers


Remote Receivers are designed to allow users of the wireless Tek-CARE500 Wireless Nurse Call System to connect external dome lights, relays, door locks, etc. to the system. This provides for an ancillary annunciation path in addition to the Tek-BRIDGE® event monitor. The remote receivers are not dependant upon the Tek-CARE500’s Tek-BRIDGE. The remote receivers feature separate, dry-contact Form-C outputs that can be programmed for activation by one or more transmitters.

All dry contact outputs are individually configurable for latching, follower, toggle, or momentary activation modes. The NC507ES includes programmable duration for the momentary mode. One NC507ES output may be configured for tamper detection, while the NC505ES and NC506ES each have a separate tamper detection output. The units are designed for indoor use only, and cable access and connections are hidden. The units feature a clean appearance with visual indication of the status. All Tek-CARE500 ES and UL transmitters except SF501ES, SF501/2ES, and SF502ES pendants may be used with the NC505ES Remote Receiver to activate outputs.

 

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated January 21,2019

Lee Dan Home PageLEE DAN® COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001-2019 Lee Dan Communications, Inc., All rights reserved.