Innovations in Communications™ Since 1955

155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail:



Tek-CARE Appliance Server

The NC475 Tek-CARE Appliance Server provides the platform to install and run various software modules for Tek-CARE healthcare communications systems. The Tek-CARE Appliance Server is designed to be desk mounted or installed in a rack mount application. If the NC475 is to be rack mounted, a third-party rack mount shelf (not included) is used. The NC475 will occupy 2U of rack space including its shelf. The Tek-CARE Appliance Server also supplies ports for the TekCARE network and the facility’s LAN, the radio pocket paging system’s paging transmitter, Tek-CARE300 II central equipment, the NC502 Central Monitoring Auto Dialer, NC510UL or NC510ES Receiver, and NC510 FA Receiver.

The LCD screen on the Tek-CARE Appliance Server displays any calls and faults active on the nurse call system. The LED indicators to the left of the LCD provide power, fault, and call status at a glance. A simple configuration menu is also accessible from the front display. The NC475DESK functions as a visual master for the Tek-CARE system. Calls, faults, and basic system configuration options are available, but audio communication is not available from the NC475 or NC475DESK. For audio communication, purchase the appropriate master station for your Tek-CARE system.


| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated June 25, 2018

 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail:

© 2001-2019 Lee Dan Communications, Inc., All rights reserved.