Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              

 NC365B

(NC-365B)
Tek-CARE 120

   
Paging Transmitter


The NC365B Paging Transmitter receives alphanumeric messages and patient call information via serial interface and transmits the information directly to pagers. Information is sent to the transmitter at 9600 baud to minimize bottlenecks. Call type and location are determined by the system supplying information to the transmitter.

The NC365B Paging Transmitter is pre-programmed for use with TekTone® systems for simplified plug-and-play setup. The system’s range depends upon the site and the transmitter’s location. To determine the exact coverage, conduct a site survey. Under ideal conditions, the NC365B Paging Transmitter’s range is approximately one mile. The unit includes a ¼-wave BNC-terminated antenna to provide coverage that meets most requirements.

 

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated June 25, 2018

Lee Dan Home PageLEE DAN® COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001-2019 Lee Dan Communications, Inc., All rights reserved.