Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
 NC-601
(NC601)

   
NC-601 NC601 Tek-BRIDGE™
with Tek-ALERT™ Software


 

The NC-601 (NC601) Tek-BRIDGE™ with Tek-ALERT™ Software includes the software and hardware to install and run the Tek-ALERT™ Integration Manager. When properly configured, the Tek-ALERT™ Integration Manager receives events from monitored foreign systems (such as nurse call and fire alarm), and displays the events on its Event Monitor.

The monitored foreign system must be able to supply an accessible data stream via one of the following protocols: Serial (event printing, Scope paging, ContactID), COMPII, TAP, NC300/NC300II, HL7, TCP/IP, TCP/IP Listener, UDP or Centrak. Contact TekTone® if a protocol is not listed, as protocol libraries will grow. Tek-BRIDGE™ also supplies ports for the facility’s local area network (LAN) and the radio pocket paging system’s paging transmitter.

Each monitored foreign system connects either to one of the unused serial ports, or to the facility’s LAN using a CT601 Serial to IP Converter

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated February 21, 2014

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8