Innovations in Communications™ Since 1955

155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail:

NC-505ES Remote LCD Receiver
with 6 Relay Outputs


The NC-505ES (NC505ES) Remote LCD Receiver is designed to allow users of the wireless Tek-CARE®500 Wireless Emergency Call System to connect external dome lamps and dialers to the system. This provides for an alternate annunciation path, in addition to the normal Tek-CARE®500 screen. The NC-505ES (NC505ES)  is not dependant upon the Tek-CARE®500's TEK-BRIDGE.

 It features 6 separate, dry-contact outputs that can be programmed for activation by up to 16 transmitters. The case has built-in tamper detection outputs for connection to an external alarm system. All dry contact outputs are individually configurable for latching, follower, toggle, or momentary activation modes.

The unit is designed for indoor use only, and cable access and connections are hidden. The face of the unit features a clean appearance with visual indication of the status. TekTone® SF501ES, SF501/2ES and SF502ES transmitters can be used with the NC-505ES  (NC505ES)  to trigger an external dialer. To support dome light annunciation, these momentary transmitters require a separate reset button, and relays programmed as latching.

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated February 21, 2014

 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail:

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8