Lee Dan logo
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com

Black Metal Button Style Vandal-Proof Intercom Lobby Panels

MS-037 MILLENNIUM Stainless Steel
Apartment Lobby Panel

37 Button Flush Mount

MILLENNIUM™ Stainless Steel
Apartment Lobby Panel

With Permanently Engraved, Individually Replaceable,
SOLID Black METAL Plungers


Standard MILLENNIUM Features

  • Flush Mount, Housing Included
  • High-Grade 16 Gauge (Low Carbon) Stainless Steel
  • Integral Polycarbonate Protected Alphabetical Directory
  • Exclusive 3-Layer Metal Speaker Baffle
  • Mylar Cone Weather-Resistant Speaker
  • Solid Permanently, Custom Engraved Black Metal Plungers
  • Self-Wiping Push Buttons with Screw Terminals
  • Push Buttons mounted on a Reinforced Backplate
  • Standard Engraved: 1-37 as shown
  • Custom Engraved: Upon Request, Such as 1A-18A, 1B-18B, SUPT
  • Optional Building Address Engraving Deters Theft (add suffix 'E' to model no.)
  • Custom Sizing Available
  • 'Tampruf' Tamper-Proof Access Screws
Surface Mount
Model Available
Also Consider
Bravo Style Stainless Steel

Millennium Button Options:

See Spec Sheet

See Wiring Instructions

Size 18 3/4" H x 10" W x 2 1/8" D
(Wall Opening: 16 1/8 ”H x 8 1/8”W x 2 1/2" Deep)
High-Grade 16 Gauge (Low Carbon) Stainless Steel
Speaker 3 1/2", 1.0 Watt, 45 Ohm Mylar Cone, Weather-Resistant
Heavy duty magnet with natural voice reproduction
Also used for tone signal from lobby panel
Grille 3-layer metal speaker baffle
Solid permanently, custom engraved black XM-090BE metal plungers
ST-008/2 Replacement Type Push Buttons
Holes 4 mounting holes, to fit BB-202 box (included)
Screws Includes 2 Tampruf tamper resistant mounting screws
Requires SC-T Tampruf tamper screw driver to install
Directory Strips
LDDS: LEE DAN Directory Strip 3 13/16" W x 1/4" H Up to 22 Characters
LDDS-B: Blank LDDS, Used for Spacing Between Names 3 13/16" W x 1/4" H Blank LDDS
LDDS-X: Broadcast Message Strip 3 13/16" W x 1" H Up to 4 Lines
Unlacquered vs. Lacquered Brass
MILLENNIUMCustom Intercom Entry Panels Are Available In Two Finishes:
STANDARD Finish is Unlacquered.
This is a bright, shiny unprotected polished finish. Unlacquered panels will show every fingerprint, and smudge. Loss of its original luster will begin immediately, and will become more noticeable as a result of passage of time and natural day to day usage. As it reacts with oxygen and the elements, the unprotected brass finish will oxidize and develop a dark patina that some consider an antique-brass, or "bronzy" look. Depending on environmental conditions, it could take approximately two years to attain the darkest patina.
Lacquer is an OPTIONAL Finish.
This is a bright, shiny protected polished finish. Lacquered panels show fewer fingerprints and fewer smudges. Most importantly, lacquered panels may retain its original luster over years of normal use. Lacquer finishes will wear over time and are not considered permanent. Only the finished front of the panel is lacquered. Edges, mounting holes and other production holes may still be vulnerable to gradual oxidation. Lacquering is meant to protect a panels' bright, shiny luster, and should not be considered a guard against scratches or vandalism. Do not attempt to polish or clean lacquered panels, as this will damage the lacquer. As an added process, lacquering may add 1-3 weeks to standard production time.

Print Lacquer Information

Required Components

PK-543A (1 per Bldg)

Apartment Stations

SC-T "Tampruf" Screwdriver

Replaceable Parts

Buttons: Call Factory



Directory Strips


Warning: filectime(): stat failed for MS-037-37-Button s-MILLENNIUM-Apartment-Intercom-Lobby-Panel.php in /domains/leedan/MS-037-37-Buttons-MILLENNIUM-Apartment-Intercom-Lobby-Panel.php on line 251
Last modification time of the file: January 01 1970 00:00:00.