NC377 Voltage Interface for TekALERT® Alert Intergration Manager

The NC377-series Voltage Interface is used with the TekALERT® Alert Integration Manager to connect switched voltage analog systems to the Tek-ALERT system. TekALERT enables such advanced features as consolidated event monitoring, management reporting, and paging for all connected systems. TekTone's Tek-CARE® NC110, NC150 and NC200 Nurse Call Systems, as well as a variety of non-TekTone® systems, use the voltage interface to communicate with the Tek-ALERT system. The voltage interface recognizes three states: off, steady on, and flashing; and can connect systems with input voltage from 5V to 50V, AC or DC. The NC377-series Voltage Interface can also integrate TekTone’s Tek-CARE NC110, NC150 and NC200 Nurse Call Systems directly with the NC369 Paging Transmitter. In this scenario, it connects directly to the nurse call master. The NC377-series Voltage Interface sends nurse call priority information via a serial port to the NC369 Paging Transmitter. The transmitter then transmits this information to the pagers, allowing the staff to distinguish call priority levels. The voltage interface is available in two configurations: The NC377/32 accommodates 32 inputs, while the NC377/64 handles up to 64 inputs. Connect up to 9 total NC377/64s to the NC365B Paging Transmitter to accommodate up to 576 inputs. (Maximum cable distance from the first NC377- series to the last one is 1,000 feet.)

 

Spec Sheet