Innovations in Communications™ Since 1955

155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail:
Nurse-Call Housing / Cabinet


The IH-151N Housing is used as a central junction point for wiring the CM-800 and Tek-CARE® NC-110, NC-150, NC-200 systems.

Knockouts are included on all sides except lid to allow the connection of electrical conduit from any direction. In addition, the lid has a knockout which can be used to install an optional key lock - the TekTone® HW231 or equivalent.

A single-gang electrical junction box is mounted inside the main enclosure to allow protected electrical connections to be made. The enclosed electrical junction box is galvanized steel with a stainless steel cover plate.


Maintenance free

Easy Installation

19-gauge steel construction

Knockouts provided

UL® 1069 Listed when constructed with PK-151A Annunciator

Power & Control Unit and SS-106 Transformer


Dimensions: Height: 11.75" (300mm) Width: 11.75" (300mm) Depth: 3.75" (96mm)

Power Required: 110VAC with PS-30A Transformers

Mounting: Surface

Click for Spec Sheet

Architects' & Engineers' Specifications:

Housing shall be TekTone®'s IH-151N housing or approved equal as supplied by LEE DAN®. The IH-151N housing shall be of steel construction for durability. It shall include a single-gang metal junction box to protect electrical connections.

Knockouts shall be provided on all sides except lid to facilitate easy connection of electrical conduit. The lid shall have a knockout for an optional key lock - TekTone® HW231 or equivalent.

All exposed surfaces shall be either stainless steel or painted to protect against oxidation. The outer enclosure shall be composed of 19-gang cold-rolled steel.


| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated July 12, 2012

 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail:

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8