Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
Back to Telephone Entry

1603
Barrier Gate Operator 1/2 HP 115VAC
With DC Convenience Open - Add hardware kit & arm
Interface

1603-081

The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete 1603 / auto-spike system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap, barrier arm, and arm hardware kit. A traffic signal and/or warning sign is required with this system.

 

Features
Magnetic limit control.
Ports for plug-in loop detectors.
Automatic sequencing inputs for use with slide and swing gate operators.
Up input memory buffer.
Down memory option.
Multiple up commands.
Two convenience outlets.
Gate tracker reporting output.
Programming switches.
Built-in power On/Off switch.
Left or right hand mount.
14 ft. aluminum barrier arm (not included, order separately).
Barrier arm hardware kit (not included, order separately).
Manual Crank kit available (1601-270).


Specifications
1/2 HP continuous-duty motor.
115, 230°, 460° VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
40:1 gear-box running in a continuous oil bath.
Arm rotates 90° in approximately 1.5 seconds.
Class II, III and IV applications.
Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 15.25"W x 43.5"H x 15.5"D.
Spike Components
Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
Spike sections surface mount: 31"W x 3"H x 36"L
End Cap: 31"W x 3"H x 12.25"L

Options:
Loop Logic vehicular / pedestrian safety system.
DC powered convenience open.
LED Lighted aluminum arm.
Foam padding for arms.
Heater kit.
Fan kit.
Surge suppressors.
Plug-in loop detectors.
Manual Crank kit.



Brochure | Manual
DKS & DoorKing are registered trademarks of DoorKing Inc. of Inglewood CA
This page was last updated July 15, 2016

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8