Innovations in Communications™ Since 1955

155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail:
Back to Telephone Entry

Barrier Gate Operator 1/2HP 115V - Add hardware kit & arm Interface


The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage. The break-a-way arm is not an option when the 1601 is equipped with the convenience open option.


Magnetic limit control.
Ports for plug-in loop detectors.
Automatic sequencing inputs for use with slide and swing gate operators.
Up input memory buffer.
Down memory option.
Multiple up commands.
Two convenience outlets.
360° gear box rotation.
Gate tracker reporting output.
Programming switches.
Built-in power On/Off switch.
Left or right hand mount.
Plastic, wood or aluminum barrier arm (not included, order separately).
Barrier arm hardware kit (not included, order separately).
Manual Crank kit available (1601-270).

1/2 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
40:1 gear-box running in a continuous oil bath.
Arm rotates 90° in approximately 1.5 seconds.
Class II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (operator only): 15.25"W x 39.5"H x 14.75"D.
Loop Logic vehicular / pedestrian safety system.
DC powered convenience open.
LED Lighted arm (Aluminum arm only)
Break-a-way arm kit (aluminum arm only)
Arm folding bracket for low headroom.
Foam padding for aluminum arm.
Plug-in loop detectors.
Heater kit.
Fan kit.
Surge suppressors.
Manual Crank kit.

Brochure | Manual
DKS & DoorKing are registered trademarks of DoorKing Inc. of Inglewood CA
This page was last updated July 14, 2016

 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail:

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8