Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
CT400 (CT-400)
&
CT400P5 (CT-400P5)

   
Splitters


The CT400 and CT400P5 splitters are used to provide room drops (similar to T-Tapping) from the station commons bus to addressable stations and zone lamps. Typically, they are used when a station commons bus is run down a hallway from corridor dome lamp to corridor dome lamp, or centrally down the hallway. Each splitter provides six jacks—an in and an out, plus up to 4 room drops.

The CT400 splitter is also used for station-to-station wiring for stations that use 6P6C connectors. Stations that use 8P8C connectors do not require CT400P5 splitters for station-to-station wiring, because they all have built-in in and out connectors. The CT400P5 splitter may also be used for the peripheral bus—wiring from IR4xx-series stations to their peripheral switches. The CT400P5 splitter is also used for the TekCARE120 or 160 master bus to connect two or three NC415/NC415A master stations to a single port on the NC120/160 CE Module.

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated June 25, 2018

Lee Dan Home PageLEE DAN® COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001-2019 Lee Dan Communications, Inc., All rights reserved.