Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
                              
 CT-601
(CT601)

CT-601 Serial to IP Converter


The CT-601 (CT601)Serial to IP Converter is used to connect a Tek- CARE® NC300/II nurse call system or a monitored foreign system to a facility’s LAN. Events and messages from the connected system are sent across the LAN to either an NC385 Tek-MMARS®300 or a Tek-BRIDGE™ running Tek- ALERT™ Software.

 The CT-601 (CT601)Serial to IP Converter becomes a virtual COM port on the Tek-MMARS®300 or Tek-BRIDGE™, and provides long distance communication between it and the monitored serial device. The CT601 eliminates the otherwise expensive long-distance cabling required for these connections. Configuring the CT-601 (CT601) is accomplished using software provided with the device. The unit can be wall or DIN-rail mounted. The CT-601 (CT601) incorporates surge protection.

| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated February 21, 2014

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8